Install Stock ROM on Aoson T7

Rooting an Android mobile phone is a really usual technique nowadays. Normally, people that want some extra control over their tool do this. There is no question that is rooting voids your device’s service warranty and, at the same time, can get you in trouble. It can trigger major damage to your gadget in regards to protection, can brick your tool, etc. There are two choices to repair this point by seeing the nearest filling station or by flashing the important data by yourself. There are countless devices available out there as well as one such device is SP Flash Device

Flashing Stock ROM or Customized ROM making use of Smart Phone Flash Tool is one of the simplest methods of doing this innovative procedure. SP Flash Tool is a software that can be mounted on your PC or Laptop and additionally aids you to flash Customized ROM, Stock ROM, unbrick bricked tools, format/erase and so on. This software is specially created for devices running MediaTek processors. In today’s article, we will certainly tell you how to Install Stock ROM on Aoson T7 using SP Flash Tool.

Using SP Flash Tool, you can flash any Android device (however make sure to examine if it is based on Mediatek IC). Flash any type of Stock ROM or Custom ROM over any Mediatek Android Devices. 

Additionally, do see to it that you have installed appropriate USB drivers effectively on your PC or computer before flashing any firmware file.

Pre-requisites:

1. Create a backup of all data of Myfon S9 before following the flashing method.
2. Check the battery percentage of the phone; it should be at least 70%.
3. Disable any anti-virus software you have installed on your computer system.
4. Use original Aoson T7 USB cable.
5. Android USB Drivers - Download
6. SP Flash Tool - Download
7. Ensure that you have installed necessary USB VCOM drivers.
8. Aoson T7 Firmware file - Download

Steps to Install Stock ROM on Aoson T7

Using SP Flash Tool, you can flash Aoson T7 Android tool. Flash any type of custom-made or stock ROM over Aoson T7. Additionally, do see to it that you have installed Aoson T7 USB drivers effectively on your PC before flashing any firmware file.

Step 1: Unzip the SmartPhone Flash Tool and also download and install SP Flash Tool software from the above pre-requisites section.

Step 2: Download flash recovery image: Flashing stock rom is not easy; it takes patience and time. To flash Aoson T7, make sure you have flash recovery image ready for your device model.

Step 3: Load scatter file: Now click on the “. exe” data to run the file. The software will ask you to fill the scatter file. Click Scatter Loading (Load Scatter file of Aoson T7).

Step 4: Uncheck all packages: Now, you need to uncheck all boxes from the SP flash tool.

Step 5: Load Recovery Image: Go to and click Recovery box from the list and load recovery image of your Aoson T7 android device

Step 6: Recovery box is checked before you connect your Aoson T7, in recovery image location (Uncheck all the remaining boxes).

Step 7: After connecting your tool with Computer or Laptop, click download button ahead and click YES.

Step 8: Now to start the Flashing process, you should remove your Aoson T7 battery (only if the battery is removable). Insert it again, Hold the Volume Down and Volume Up Button together and Connect your Aoson T7 to Computer or Laptop using USB Cable (Keep the Volume Down and Volume Up key until your computer detects the phone.)

Step 9: Once, you are practically done with the Flashing process; it will be triggered with a green circle.

Step 10: That’s it! You have successfully flashed stock ROM in Aoson T7.

Conclusion

So that’s it guys, this is how you Install Stock ROM in your Aoson T7. We hope that you find this post useful. If you’re facing any kind of issue during the flashing process, then let us know via the comment section. We will be happy to assist you.